Home /
FlexPort Analog Gage Interface FP-8A

FlexPort Analog Gage Interface FP-8A

FP-8A

FlexPort Analog — 8-Input A/D Gage Interface

Capture up to eight analog signals (±10 V or 4–20 mA), apply per-channel calibration and engineering units, then send clean digital readings to your PC via RS-232 (USB via serial adapter). Ideal for multi-sensor fixtures, probes, and process transducers.

Features

8 analog channels with 16-bit A/D conversion
Accepts ±10 V or 4–20 mA inputs
Per-channel calibration, engineering-unit scaling, and resolution control
Trigger via 2.5 mm contact-closure (hand/footswitch) or PC host commands
Single-shot and TIR/dynamic readings; outputs labeled by channel
Pass-Thru (DB9M) for serial gages or daisy-chaining interfaces (up to 99 inputs)
Front-panel LEDs confirm data requests and successful sends
PC connection via RS-232; optional USB (VCP) with a USB–serial adapter
Rugged metal enclosure; engineered and supported by Midwest FlexSystems

Availability: In stock

$1,195.00

Upgrade to International Power Supply

International Power Supply (European 220v/US 110v) (includes US, EURO, UK & Australian adapters) (6 ft) +$50.00

$1,195.00

Qty:

Front panel - FlexPort Analog Gage Interface FP-8A

Double click on above image to view full picture

More Views

Product Description

FlexPort Analog — Built for precise multi-channel analog measurement

Connect voltage or current-loop sensors, scale each channel to engineering units, and deliver clean, consistent readings to any software that accepts serial data.

Technical Data
Technical Data — FlexPort Analog FP-8A
Number of Inputs	8 × analog inputs + 1 × Pass-Thru (serial backplane)
A/D Resolution	16-bit conversion
Accepted Input Types	±10 V (voltage) and 4–20 mA (current loop)
Scaling & Units	Per-channel calibration, engineering-unit scaling, and resolution control
Measurement Modes	Single-shot and dynamic TIR
Trigger Options	External 2.5 mm contact-closure (hand/footswitch); PC host commands
Outputs	RS-232 serial to PC; optional USB (VCP) via USB–serial adapter
Connectors	Inputs: 5-pin DIN (180°) per channel; Data-send jack: 2.5 mm; Pass-Thru: DB9M; PC Output: DB25F
Status Indication	Front-panel LEDs indicate request and successful send per channel
Chaining	Daisy-chain multiple FlexPorts via Pass-Thru (mix digital/analog/remote display) — up to 99 inputs
Power	110 V wall adapter (7–9 VDC, center-positive). International supply optional.
Included	FP-8A interface; power supply; RS-232 cable (USB adapter optional)
Typical Uses	Multi-probe fixtures, LVDTs, transducers; analog capture to SPC/Excel/databases
SKU	FP-8A
Notes	Outputs identify readings by channel number for easy tracking.

We Also Recommend

You may also be interested in the following product(s)

FlexPort Analog Gage Interfaces

From: $795.00

To: $1,270.00

Additional Information

Name	FlexPort Analog Gage Interface FP-8A
SKU	FP-8A
Weight (in lbs)	2.6
Manufacturer	Midwest FlexSystems Inc
Number of inputs	8 Analog - 1 PassThru
Input type	+/- 10 vdc or 4-20 mA
Output type	Standard RS232
Power Supply	110v Wall Adapter 7-9VDC Center Positive
Gage Input Connector	5pin DIN (180°)
Data Send Input	2.5mm jack
Output Connector	DB25 Female