Product Description
| Technical Data — FlexBatteryPack Charger | |
|---|---|
| Product / SKU | FlexBatteryPack Charger · FBP-CHG |
| Use With | FBP-6V-3300 battery pack (sold separately) |
| Input | AC 120–240 V, international use |
| Certifications | CE & UL |
| Supported Chemistries | NiMH / NiCd |
| Charge Algorithm | Negative-ΔV (auto cut-off when full) |
| Voltage Detection | Auto-detects pack voltage from 4.8–10.8 V |
| Indicators | Self-test (LED flashes red→green→red on start); Red = charging; Green = full |
| Protections | No-load output off, over-current protection, reverse-polarity protection |
| Charge Rate / Time | ≈ 2 hrs at ~2 A (typical) |
| Cord Length | Approx. 9 ft total |
| Case Dimensions | 5.5" L × 2.5" W × 1.5" H |
| Charge Interface | Connects to the single DC lead from FlexBatteryPack |
| Simultaneous Connection | Not supported — charge only when the pack is not connected to a device |
Important: The system uses a one-plug, either/or workflow. Disconnect the battery from FlexDisplay/FlexPort before charging to prevent interference and ensure proper charging.
Additional Information
| Name | FlexBatteryPack Charger FBP-CHG |
|---|---|
| SKU | FBP-CHG |
| Weight (in lbs) | 2.5 |
| Manufacturer | Midwest FlexSystems Inc |
| Number of inputs | 2 hours quick charge |