Mitutoyo 543-301B ABSOLUTE LCD Digimatic Indicator ID-C with Max/Min Value Holding Function

543 Series FEATURES

With max./min. value holding function model of the ID-C Series Digimatic Indicators.

• The maximum, minimum, or runout value can be displayed during measurement.
• GO/±NG judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
• High speed sampling ratio of 50 times/s.
• Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on.

Technical Data
Accuracy: Refer to the list of specifications.
Resolution: 0.001mm, .00005”/0.001mm or .0001”/0.001mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Measuring force: 1.5N or less
Battery: SR44 (2 pcs.), 938882
Battery life: Approx. 800 - 1300 hours under normal use
Dust/Water protection level: IP42

Function
Origin-set/Preset, Zeroset, GO/±NG judgment, Max/Min/Runout value holding, Counting direction switching, Power
ON/OFF, Data output,inch/mm conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error

Optional Accessories
905338: SPC cable (40” / 1m)
905409: SPC cable (80” / 2m)
902011: Spindle lifting lever (ISO/JIS type)
902794: Spindle lifting lever (ANSI/AGD type)
540774: Spindle lifting cable (stroke: .4” / 10mm)